Desain Geometri Lereng Optimal Pada Rencana Penggalian Ulang Material Timbunan Berdasarkan Parameter Geoteknik Melalui Pendekatan Tingkat Pemadatan Timbunan
##plugins.themes.academic_pro.article.main##
Published
May 1, 2025
Abstract
This study analyzes the slope stability in Pit X of PT Bukit Asam, Tbk (PTBA), which is a former disposal area that has been re-excavated, resulting in the presence of old dump material. The objective of this study is to analyze and process the material properties used in assessing the slope stability in Pit X and to determine the optimal overall slope geometry for Pit X. In this study, the determination of material properties for slope stability analysis in Pit X was carried out by creating cross-sections, considering the position of boreholes, and processing material properties from the nearest borehole data using a class creation and interval creation approach for each material property. The material properties used are the median values of each class. The most optimal overall slope geometry consists of a single bench height of 6 meters, a single bench width of 12 meters (1:2 ratio), and a bench width of 23 meters. This slope geometry was applied to all cross-sections, resulting in a dynamic factor of safety (FoS) of 1.216 and a static FoS of 1.393 for cross-section A-A', a dynamic FoS of 1.552 and a static FoS of 2.016 for cross-section B-B', a dynamic FoS of 1.529 and a static FoS of 1.760 for cross-section C-C', and a dynamic FoS of 1.585 and a static FoS of 1.827 for cross-section D-D', all of which are considered safe. These FoS values were obtained under conditions immediately after rainfall had ceased, with a recorded rainfall intensity of 110.08 mm and a duration of 4.18 hours.
##plugins.themes.academic_pro.article.details##
This work is licensed under a Creative Commons Attribution 4.0 International License.
Hak Cipta :
Penulis yang mempublikasikan manuskripnya di jurnal ini menyetujui ketentuan berikut:
- Hak cipta pada setiap artikel adalah milik penulis.
- Penulis mengakui bahwa Ranah Research : Journal of Multidisciplinary Research and Development berhak menjadi yang pertama menerbitkan dengan lisensi Creative Commons Attribution 4.0 International (Attribution 4.0 International CC BY 4.0) .
- Penulis dapat mengirimkan artikel secara terpisah, mengatur distribusi non-eksklusif manuskrip yang telah diterbitkan dalam jurnal ini ke versi lain (misalnya, dikirim ke repositori institusi penulis, publikasi ke dalam buku, dll.), dengan mengakui bahwa manuskrip telah diterbitkan pertama kali di Ranah Research.
References
Andinia, M., Niki, R. R., Rimos, P., Prihasro, F. E., Trilaksana, A. R., Dewi, N. F. R. 2019. Kajian Pengaruh Material Propertis Dominan Batuan Dasar Terhadap Kestabilan Lereng pada Nikel Laterit di Site Pomala Sulawesi Tenggara PT Antam Tbk. Prosiding TPT XXVII Perhapi
Sepriadi., Adiwarman, M., dan Zahara, K. A. 2024. Analisis Kestabilan Lereng Highwall Dengan Metode Morgenstern Price Pada PIT 2 Banko Barat Di PT. Bukit Asam, Tbk. Jurnal Ilmiah Teknik dan Sains,
Maulana, L. H., Fajar, J. D., 2019. Kajian Geoteknik untuk Optimalisasi Desain Tambang Batubara menggunakan Limit Equilibrium Method. Prosiding TPT XVIII Perhapi 2019.
Sutejo, D. P., Saffaruddin., Hartoyo, Y. 2023. Analisis Kestabilan Lereng Lowwall Pada Penambangan Batugamping di PT Semen Baturaja (Persero) Tbk Kabupaten Ogan Komering Ulu Provinsi Sumatera Selatan. Prosiding Nasional Rekayasa Teknologi Industri dan Informasi XVIII Tahun 2023 (ReTII)
Rahman, H. T., Zakaria, Z., Ismawan., Gunawan, W. 2022. Optimisasi Lereng Highwall Tambang Batubara Terbuka Sikui Project Area Berdasarkan Metode Kesetimbangan Batas Morgestern Price. Padjajaran Geoscience Journal.
Taban A., Sadeghi, M. M., dan Rowshanzamir, M.A., 2017. The Estimation of van Genuchten SWCC Model for Unsaturated Sands by means of the Genetic Programming. Scientia Iranica A (2018) 25(4), 2026-2038.